Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.
LV-CAN200 is designed to acquire data from light vehicles, trucks and buses.
Trucks
CAN data reading from trucks
Basic CAN Data Reading
Easily get basic parameters such as mileage, fuel level, etc.
Cars
CAN data reading from light vehicles
Buses
CAN data reading from buses and coaches
Input Voltage Range: 9 – 63.5 V DC
Power Consumption: At 12 V < 0.4 mA (Standby)
At 12V < 10.6 mA (Working)
Weight: 55g
Operating Temperature: -40 °C to +85 °C
Features Total fuel consumption
Fuel level (Dashboard)
Vehicle mileage
Door status
Engine speed (RPM)
Engine temperature
Vehicle speed
Accelerator pedal position
CNG level
Total CNG consumption
Engine is working on CNG
*Number of parameters depends on vehicle model, year and equipment.
Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi Security: WPA2-Enterprise – PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation
SSID: SSID stealth mode and access control based on MAC address
WiFI Users: Up to 50 simultaneous connections
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN: 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Routing: Static routing, Dynamic routing (Optional – BGP, OSPF v2, RIP v1/v2)
Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
VoIP Pass-through Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules
DHCP: Static and dynamic IP allocation, DHCP Relayd
QoS: Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network Backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load Balancing: Balance your internet traffic over multiple WAN connections
NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attach Prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi Security: WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation
VLAN: Tag based VLAN separation
Mobile Quota Control: Set up custom data limits for the SIM card
WEB Filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access Control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods.
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
GRE GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTP: SSTP client instance support
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 (optional): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SMNP: SNMP (v1, v2, v3), SNMP trap
JSON-PPC Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Remote Management System (RMS)
CPU: Atheros Hornet, MIPS 24Kc, 400 MHz
RAM: 64 MB, DDR2
Flash Memory: 16 MB SPI Flash
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep Settings: Update FW without losing current configuration
Operating System: RutOS (OpenWrt based Linux OS)
Support Languages: Busybox shell, Lua, C, C++
Events: SMS, EMAIL, RMS
Input: 1 x Digital non-isolated input (on 4 pin power connector)
Output: 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
Events: SMS, EMAIL, RMS
Connector: 4 pin industrial DC power socket
Input Voltage Range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
PoE (passive): Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at
Power Consumption <5 W
Ethernet: 2 x RJ45 ports, 10/100 Mbps
I/O’s: 1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power: 4 pin DC connector
Antennas: 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
Reset Reset/restore to default button
Casing Material: Aluminum housing, plastic panels
Dimensions: 83 mm x 74 mm x 25 mm (H x W x D)
Weight: 125 g
Mounting Options: Bottom and sideways DIN rail mounting slots
Operating Temperature: -40 °C to 75 °C
Operating Humidity: 10% to 90% non-condensing
Weight: 125 g
Ingress Protection Rating: IP30
MTBF 310000 h
Regulatory: CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance
Operator: Verizon, AT&T
Standards: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
ESD: EN61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge Immunity (AC Porwer Line): EN 61000-4-5:2006
Surge Immunity(Ethernet Ports): EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS: EN 61000-4-6:2009
DIP: EN 61000-4-11:2004
Standards: EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
Standards: IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
AS/NZS 60950.1:2015
EN 50665:2017, EN 62311:2008
FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015)