RUT955 is a highly reliable and secure 4G/LTE router with I/O, GNSS and RS232/RS485 intended for professional applications. The device delivers high performance, mission-critical cellular communication and GPS location capabilities and is equipped with connectivity redundancy through Dual-SIM failover.
External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.
Highly secure and reliable industrial device is equipped with Ethernet, Digital & Analogue I/Os, RS232, RS485, GNSS (GPS), microSD and USB interfaces.
Wireless
Wireless Access Point with Hotspot functionality
GNSS Positioning
GNSS positioning with geofencing functionality
Dual Sim
Dual SIM – significantly reduce roaming costs
RMS
Remote Management System compatible
- Mobile
- Wireless
- Ethernet
- Network
- Security
- VPN
- ModBus
- ModBus RTU Naster (RS485)
- Monitoring and Management
- System Characteristics
- Firmware / Configuration
- Firmware Customization
- Location Tracking
- Serial
- Input / Output
- USB
- SD
- Power
- Physical Interfaces (port, LEDs, Antennas, Buttons, SIM)
- Physical Specifications
- Operating Environment
- Regulatory and Type Approvals
- EMI Community
- RF
- Safety
Mobile Module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM Switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White List (optional): Operator black/white list
Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services
Band Management: Band lock, Used band status display
Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi Security: WPA2-Enterprise – PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation
SSID: SSID stealth mode and access control based on MAC address
WiFI Users: Up to 100simultaneous connections
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN: 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
VoIP Pass-through Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules
DHCP: Static and dynamic IP allocation, DHCP Relayd
QoS: Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network Backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load Balancing: Balance your internet traffic over multiple WAN connections
NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attach Prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi Security: WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation
VLAN: Tag based VLAN separation
Mobile Quota Control: Set up custom data limits for the SIM card
WEB Filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access Control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods.
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
GRE GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTP: SSTP client instance support
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 (optional): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SMNP: SNMP (v1, v2, v3), SNMP trap
JSON-PPC Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Remote Management System (RMS)
ModBus TCP Slave: ID range 1-255
ModBus TCP Master: Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
Supported baud Rates: From 300 to 115200
Supported Functions: 01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms)
Number of data bits 8
Number of stop bits: 1
Parity: None, Even, Odd
Flow: JNone, Xon/Xoff
Duplex: Half Duplex
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 (optional): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SMNP: SNMP (v1, v2, v3), SNMP trap
JSON-PPC Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Remote Management System (RMS)
CPU: Atheros Hornet, MIPS 24Kc, 400 MHz
RAM: 128MB, DDR2
Flash Memory: 16 MB SPI Flash
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep Settings: Update FW without losing current configuration
GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinatess: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server Software supported server software TAVL, RMS
Mobile Network Geolocation: Location without using GPS, get approximate location based on mobile tower on RMS
Geofencing: Configurable multiple geofence zones
RS232: DB9 connector, full RS232 (with RTS, CTS)
RS485: RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
Serial Functions: Console, Serial over IP, Modem, Modbus gateway, NTRIP Client
Input: 1 x digital input (0 – 3 V), 1 x digital galvanically isolated input (0 – 30 V), 1 x analog input (0 – 24 V), 1 x Digital non- isolated input (on 4 pin power connector)
Output: 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
Events: SMS, EMAIL, RMS
Data Rate: USB 2.0
Application: Samba share, custom scripts
External devices: Possibility to connect external HDD, flash drive, additional modem, printer
Storage Formats: FAT, FAT32, NTFS
Physical Size: Micro SD
Application: Samba share, custom scripts
Capacity: Up to 32 GB
Connector: 4 pin industrial DC power socket
Input Voltage Range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
PoE (passive): Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at
Power Consumption < 2 W idle, < 7 W Max
Ethernet: 4 x RJ45 ports, 10/100 Mbps
I/O’s: 10 Inputs/Outputs pin connector, 2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600)
Status LEDs: 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
Power: 4 pin power connector with 2 pins for Input/Output
Input/Output: 10 pin industrial socket for inputs/outputs
Antennas: 2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antenna connectors
USB: USB A port for external devices
SD Card: Micro SD card slot
RS232: DB9 socket for full-featured RS232
RS485: 6 pin industrial socket for 2/4 wire RS485
Reset Reset/restore to default button
Casing Material: Aluminum housing, plastic panels
Dimensions: 50 mm x 100 mm x 110 mm (H x W x D)
Weight: 287g
Mounting Options: DIN rail (can be mounted on two sides), flat surface placement
Operating Temperature: -40 °C to 75 °C
Operating Humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30
MTBF 230000 h
Regulatory: CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance
Operator: Verizon, AT&T
Standards: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
ESD: EN61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge Immunity (AC Porwer Line): EN 61000-4-5:2006
Surge Immunity(Ethernet Ports): EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS: EN 61000-4-6:2009
DIP: EN 61000-4-11:2004
Standards: EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
Standards: IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
AS/NZS 60950.1:2015
EN 50665:2017, EN 62311:2008
FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015)