Mobile Module:                 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

Sim Swith:                         2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network                                                 denied, data connection fail, SIM idle protection (planned)

Status:                                 Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received

Bridge:                                 Direct connection (bridge) between mobile ISP and device on LAN

SMS:                                 SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned),                                                 SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS (planned), SMS autoreply, SMPP                                                 (planned)

Black/White List:                 Operator black/white list

Multiple PDN (planned): Possibility to use different PDNs for multiple network access and services

Band Management:         Band lock, Used band status display

APN:                                 Auto APN

Bridge:                                 Direct connection (bridge) between mobile ISP and device on LAN

Wireless mode:     802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast                                     transition, Access Point (AP), Station (STA)

WiFi Security:             WPA2-Enterprise – PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation

ESSID:                     ESSID stealth mode

Wireless Hotspot:     Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

WAN:         1 x WAN port (can be configured to LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u,                         802.3az standards, supports auto MDI/MDIX crossover

LAN:         3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports                         auto MDI/MDIX crossover

Bluetooth LE:     Bluetooth low energy (LE) for short range communication

Applications:         Samba share, custom scripts

Data Rate:         USB 2.0

External Devices: Possibility to connect external HDD, flash drive

Storage Formats: FAT, FAT32, NTFS

Routing:                                     Static routing, Dynamic routing (Optional – BGP, OSPF v2, RIP v1/v2)

NetSnapper (optional):             Mobile connection management, data compression VPN client (not available in standard FW)

Network Protocols:             TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP,                                                     PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)

VoIP Pass-through Support:     H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection Monitoring:             Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall:                                     Port forward, traffic rules, custom rules

DHCP:                                     Static and dynamic IP allocation, DHCP Relayd

QoS:                                     Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing                                                     by source/destination, service, protocol or port, WMM, 802.11e

DDNS                                     Supported >25 service providers, others can be configured manually

Network Backup:                     VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using                                                     automatic Failover

Load Balancing:                     Balance your internet traffic over multiple WAN connections

NetSnapper (optional):             Mobile connection management, data compression VPN client (not available in standard FW)

SSHFS (optional):                     Possibility to mount remote file system via SSH protocol (not available in standard FW)

Authentication     Pre-shared key, digital certificates, X.509 certificates

Firewall:                     Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ;                                     NAT; NAT-T

Attach Prevention:     DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port                                     scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

WiFi Security:             WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation

VLAN:                      Tag based VLAN separation

Mobile Quota Control: Set up custom data limits for the SIM card

WEB Filter:                 Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access Control:          Flexible access control of TCP, UDP, ICMP packets, MAC address filter

OpenVPN:                 Multiple clients and server can be running simultaneously, 12 encryption methods.

OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC,                                         CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec                         IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

GRE                                 GRE tunnel

PPTP, L2TP:                 Client/Server services can run simultaneously

Stunnel:                         Proxy designed to add TLS encryption functionality to existing clients and servers without any                                         changes in the programs’ code

SSTP:                         SSTP client instance support

ModBus TCP Slave:                 ID range 1-255

ModBus TCP Master:                 Supported functions 01, 02, 03, 04, 05, 06, 15, 16

Supported data formats 8 bit:     INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with                                                         byte- swapped, Little endian, Little endian with byte-swapped)

WEB UI:                 HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log

FOTA:                 Firmware update from sever, automatic notification

SSH:                 SSH (v1, v2)

SMS:                 SMS status, SMS configuration, send/read SMS via HTTP POST/GET

TR-069 (planed): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT:                 MQTT Broker, MQTT publisher

SNMP:                 SNMP (v1, v2, v3), SNMP trap

JSON-RPC         Management API over HTTP/HTTPS

MODBUS:         MODBUS TCP status/control

RMS:                 Remote Management System (RMS)

CPU:                 Quad-core ARM Cortex A7, 717 MHz

RAM:                 256 MB, DDR3

Flash Memory: 256 MB SPI Flash

WEB UI:                 Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA:                 Update FW/configuration from server

RMS:                 Update FW/configuration for multiple devices

Keep Settings: Update FW without losing current configuration

Operating System:         RutOS (OpenWrt based Linux OS)

Support Languages: Busybox shell, Lua, C, C++

Development Tools: SDK package with build environment provided (planed)

Input: 1 x Digital Input

Output: 1 x Digital Output

Events: SMS, EMAIL, RMS

Connector:                 4 pin industrial DC power socket

Input Voltage Range: 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive):         Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at                                         standards

Power Consumption 11 W Max

Ethernet:         4 x RJ45 ports, 10/100/1000 Mbps

I/O’s:         1 Digital Input, 1 Digital Output on 4 pin power connector

Status LEDs: 3 x connection status LEDs, 5 x connection strength LEDs, 8 x LAN status LEDs, 4 x WAN status LEDs, 1 x                         Power LED, 2.4G and 5G WiFi LEDs

SIM:                 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders

Power:         4 pin DC connector

Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS

Reset         Reset/restore to default button

Casing Material:     Aluminum housing, plastic panels

Dimensions:             115 mm x 95 mm x 44 mm (H x W x D)

Weight:                     456g

Mounting Options:     DIN rail (can be mounted on two sides), flat surface placement

Operating Temperature: -40 °C to 75 °C

Operating Humidity:         10% to 90% non-condensing

Ingress Protection Rating: IP30

Regulatory: CE/RED, RoHS, REACH

Vehicle:         ECE R10 (E-mark)

Standards:         EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN                                 301 489-17 V3.2.0

ESD:                 EN61000-4-2:2009

RS:                         EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT:                         EN 61000-4-4:2012

Surge Protection: EN 61000-4-5:2014

CS:                         EN 61000-4-6:2014

DIP:                         EN 61000-4-11:2004

Standards: ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1